The cellular traces have been stunted having a Na+ /K+ -ATPase chemical, digoxin, to evaluate the procedure reply regarding Siremadlin mw e for example $$ k_ie $$ , R 10 we $$ R_10i $$ , and Medical extract versus zoonotic infection we $$ dy substantiate the feasibility of using saturation recovery data of multiple samples with different GBCA concentrations for simultaneous measurement of the cellular water efflux rate, intracellular volume fraction, and intracellular longitudinal relaxation rate in cancer cells.Dry eye disease (DED) affects nearly 55% of people worldwide; several studies have proposed that central sensitization and neuroinflammation may contribute to the developing corneal neuropathic pain of DED, while the underlying mechanisms of this contribution remain to be investigated. Excision of extra orbital lacrimal glands established the dry eye model. Corneal hypersensitivity was examined through chemical and mechanical stimulation, and open field test measured the anxiety levels. Restingstate fMRI is a method of functional magnetic resonance imaging (rs-fMRI) was performed for anatomical involvement of the brain regions. The amplitude of low-frequency fluctuation (ALFF) determined brain activity. Immunofluorescence testing and Quantitative real-time polymerase chain reaction were also performed to further validate the findings. Compared with the Sham group, ALFF signals in the supplemental somatosensory area, secondary auditory cortex, agranular insular cortex, temporal association areas, and ectorhinal cortex brain areas were increased in the dry eye group. This change of ALFF in the insular cortex was linked with the increment in corneal hypersensitivity (p less then 0.01), c-Fos (p less then 0.001), brain-derived neurotrophic factor (p less then 0.01), TNF-α, IL-6, and IL-1β (p less then 0.05). In contrast, IL-10 levels (p less then 0.05) decreased in the dry eye group. DED-induced corneal hypersensitivity and upregulation of inflammatory cytokines could be blocked by insular cortex injection of Tyrosine Kinase receptor B agonist cyclotraxin-B (p less then 0.01) without affecting anxiety levels. Our study reveals that the functional activity of the brain associated with corneal neuropathic pain and neuroinflammation in the insular cortex might contribute to dry eye-related corneal neuropathic pain.The bismuth vanadate (BiVO4) photoanode receives extensive attention in photoelectrochemical (PEC) water splitting. However, the high charge recombination rate, low electronic conductivity, and sluggish electrode kinetics have inhibited the PEC performance. Increasing the reaction temperature for water oxidation is an effective way to enhance the carrier kinetics of BiVO4. Herein, a polypyrrole (PPy) layer was coated on the BiVO4 film. The PPy layer could harvest the near-infrared light to elevate the temperature of the BiVO4 photoelectrode and further improve charge separation and injection efficiencies. In addition, the conductive polymer PPy layer acted as an effective charge transfer channel to facilitate photogenerated holes moving from BiVO4 to the electrode/electrolyte interface. Therefore, PPy modification led to a significantly improved water oxidation property. After loading the cobalt-phosphate co-catalyst, the photocurrent density reached 3.64 mA cm-2 at 1.23 V vs the reversible hydrogen electrode, corresponding to an incident photon-to-current conversion efficiency of 63% at 430 nm. This work provided an effective strategy for designing a photothermal material assisted photoelectrode for efficient water splitting.While short-range noncovalent interactions (NCIs) are proving to be of importance in many chemical and biological systems, these atypical bindings happen within the so-called van der Waals envelope and pose an enormous challenge for current computational methods. We introduce SNCIAA, a database of 723 benchmark interaction energies of short-range noncovalent interactions between neutral/charged amino acids originated from protein x-ray crystal structures at the “gold standard” coupled-cluster with singles, doubles, and perturbative triples/complete basis set [CCSD(T)/CBS] level of theory with a mean absolute binding uncertainty less than 0.1 kcal/mol. Subsequently, a systematic assessment of commonly used computational methods, such as the second-order Møller-Plesset theory (MP2), density functional theory (DFT), symmetry-adapted perturbation theory (SAPT), composite electronic-structure methods, semiempirical approaches, and the physical-based potentials with machine learning (IPML) on SNCIAA is carried out. It is shown that the inclusion of dispersion corrections is essential even though these dimers are dominated by electrostatics, such as hydrogen bondings and salt bridges. Overall, MP2, ωB97M-V, and B3LYP+D4 turned out to be the most reliable methods for the description of short-range NCIs even in strongly attractive/repulsive complexes. SAPT is also recommended in describing short-range NCIs only if the δMP2 correction has been included. The good performance of IPML for dimers at close-equilibrium and long-range conditions is not transferable to the short-range. We expect that SNCIAA will assist the development/improvement/validation of computational methods, such as DFT, force-fields, and ML models, in describing NCIs across entire potential energy surfaces (short-, intermediate-, and long-range NCIs) on the same footing.We present the first experimental application of coherent Raman spectroscopy (CRS) on the ro-vibrational ν2 mode spectrum of methane (CH4). Ultrabroadband femtosecond/picosecond (fs/ps) CRS is performed in the molecular fingerprint region from 1100 to 2000 cm-1, employing fs laser-induced filamentation as the supercontinuum generation mechanism to provide the ultrabroadband excitation pulses. We introduce a time-domain model of the CH4 ν2 CRS spectrum, including all five ro-vibrational branches allowed by the selection rules Δv = 1, ΔJ = 0, ±1, ±2; the model includes collisional linewidths, computed according to a modified exponential gap scaling law and validated experimentally. The use of ultrabroadband CRS for in situ monitoring of the CH4 chemistry is demonstrated in a laboratory CH4/air diffusion flame CRS measurements in the fingerprint region, performed across the laminar flame front, allow the simultaneous detection of molecular oxygen (O2), carbon dioxide (CO2), and molecular hydrogen (H2), along with CH4. Fundamental physicochemical processes, such as H2 production via CH4 pyrolysis, are observed through the Raman spectra of these chemical species. In addition, we demonstrate ro-vibrational CH4 v2 CRS thermometry, and we validate it against CO2 CRS measurements. The present technique offers an interesting diagnostics approach to in situ measurement of CH4-rich environments, e.g., in plasma reactors for CH4 pyrolysis and H2 production.Density functional theory (DFT)-1/2 is an efficient bandgap rectification method for DFT under local density approximation (LDA) or generalized gradient approximation. It was suggested that non-self-consistent DFT-1/2 should be used for highly ionic insulators like LiF, whereas self-consistent DFT-1/2 should still be used for other compounds. Nevertheless, there is no quantitative criterion prescribed for which implementation should work for an arbitrary insulator, which leads to severe ambiguity in this method. In this work, we analyze the impact of self-consistency in DFT-1/2 and shell DFT-1/2 calculations in insulators or semiconductors with ionic bonds, covalent bonds, and intermediate cases and show that self-consistency is required even for highly ionic insulators for globally better electronic structure details. The self-energy correction renders electrons more localized around the anions in self-consistent LDA-1/2. The well-known delocalization error of LDA is rectified, but with strong overcorrection, due to the presence of additional self-energy potential. However, in non-self-consistent LDA-1/2 calculations, the electron wave functions indicate that such localization is much more severe and beyond a reasonable range because the strong Coulomb repulsion is not counted in the Hamiltonian. Another common drawback of non-self-consistent LDA-1/2 is that the ionicity of the bonding gets substantially enhanced, and the bandgap can be enormously high in mixed ionic-covalent compounds like TiO2.An insightful understanding of the interaction between the electrolyte and reaction intermediate and how promotion reaction occurs of electrolyte is challenging in the electrocatalysis reaction. Herein, theoretical calculations are used to investigate the reaction mechanism of CO2 reduction reaction to CO with different electrolytes at the Cu(111) surface. By analyzing the charge distribution of the chemisorbed CO2 (CO2 δ-) formation process, we find that the charge transfer is from metal electrode transfer to CO2 and the hydrogen bond interaction between electrolytes and CO2 δ- not only plays a key role in the stabilization of CO2 δ- structure but also reduces the formation energy of *COOH. In addition, the characteristic vibration frequency of intermediates in different electrolyte solutions shows that H2O is a component of HCO3 -, promoting CO2 adsorption and reduction. Our results provide essential insights into the role of electrolyte solutions in interface electrochemistry reactions and help understand the catalysis process at the molecular level.The potential dependence of the rate of dehydration of formic acid to adsorbed CO (COad) on Pt at pH 1 has been studied on a polycrystalline Pt surface by time-resolved surface-enhanced infrared absorption spectroscopy in the attenuated total reflection mode (ATR-SEIRAS) with simultaneous recording of current transients after a potential step. A range of formic acid concentrations has been used to obtain a deeper insight into the mechanism of the reaction. The experiments have allowed us to confirm that the potential dependence of the rate of dehydration has a bell shape, going through a maximum around the potential of zero total charge (pztc) of the most active site. The analysis of the integrated intensity and frequency of the bands corresponding to COL and COB/M shows a progressive population of the active sites on the surface. The observed potential dependence of the rate of formation of COad is consistent with a mechanism in which the reversible electroadsorption of HCOOad is followed by its rate-determining reduction to COad.Methods for computing core-level ionization energies using self-consistent field (SCF) calculations are evaluated and benchmarked. These include a “full core hole” (or “ΔSCF”) approach that fully accounts for orbital relaxation upon ionization, but also methods based on Slater’s transition concept in which the binding energy is estimated from an orbital energy level that is obtained from a fractional-occupancy SCF calculation. A generalization that uses two different fractional-occupancy SCF calculations is also considered. The best of the Slater-type methods afford mean errors of 0.3-0.4 eV with respect to experiment for a dataset of K-shell ionization energies, a level of accuracy that is competitive with more expensive many-body techniques. An empirical shifting procedure with one adjustable parameter reduces the average error below 0.2 eV. This shifted Slater transition method is a simple and practical way to compute core-level binding energies using only initial-state Kohn-Sham eigenvalues. It requires no more computational effort than ΔSCF and may be especially useful for simulating transient x-ray experiments where core-level spectroscopy is used to probe an excited electronic state, for which the ΔSCF approach requires a tedious state-by-state calculation of the spectrum. As an example, we use Slater-type methods to model x-ray emission spectroscopy.Layered double hydroxides (LDH) can be transformed from alkaline supercapacitor material into metal-cation storage cathode working in neutral electrolytes through electrochemical activation. However, the rate performance for storing large cations is restricted by the small interlayer distance of LDH. Herein, the interlayer distance of NiCo-LDH is expanded by replacing the interlayer nitrate ions with 1,4-benzenedicarboxylic anions (BDC), leading to the enhanced rate performance for storing large cations (Na+, Mg2+, and Zn2+), whereas almost the unchanged one for storing small-radius Li+ ions. The improved rate performance of the BDC-pillared LDH (LDH-BDC) stems from the reduced charge-transfer and Warburg resistances during charge/discharge due to the increased interlayer distance, as revealed by in situ electrochemical impedance spectra. The asymmetric zinc-ion supercapacitor assembled with LDH-BDC and activated carbon presents high energy density and cycling stability. This study demonstrates an effective strategy to improve the large cation storage performance of LDH electrodes by increasing the interlayer distance.Ionic liquids have generated interest in applications as lubricants and as additives to conventional lubricants due to their unique physical properties. In these applications, the liquid thin film can be subjected simultaneously to extremely high shear and loads in addition to nanoconfinement effects. Here, we use molecular dynamics simulations with a coarse-grained model to study a nanometric film of an ionic liquid confined between two planar solid surfaces both at equilibrium and at several shear rates. The strength of the interaction between the solid surface and the ions was changed by simulating three different surfaces with enhanced interactions with different ions. The increase in the interaction with either the cation or the anion leads to the formation of a solid-like layer that moves alongside the substrates; however, this layer can exhibit different structures and stability. An increase in the interaction with the high symmetry anion produces a more regular structure that is more resistant to the effects of shear and viscous heating. Two definitions were proposed and used for the calculation of the viscosity a local definition based on the microscopic characteristics of the liquid and an engineering definition based on the forces measured at the solid surfaces, with the former displaying a correlation with the layered structure induced by the surfaces. Because of the shear thinning behavior of the ionic liquids as well as the temperature rise brought on by viscous heating, both the engineering and the local viscosities decrease as the shear rate increases.The vibrational spectrum of the alanine amino acid was computationally determined in the infrared range 1000-2000 cm-1, under various environments encompassing the gas, hydrated, and crystalline phases, by means of classical molecular dynamics trajectories, carried out with the Atomic Multipole Optimized Energetics for Biomolecular Simulation polarizable force field. An effective mode analysis was performed, in which the spectra are optimally decomposed into different absorption bands arising from well-defined internal modes. In the gas phase, this analysis allows us to unravel the significant differences between the spectra obtained for the neutral and zwitterionic forms of alanine. In condensed phases, the method provides invaluable insight into the molecular origins of the vibrational bands and further shows that peaks with similar positions can be traced to rather different molecular motions.Pressure-induced perturbation of a protein structure leading to its folding-unfolding mechanism is an important yet not fully understood phenomenon. The key point here is the role of water and its coupling with protein conformations as a function of pressure. In the current work, using extensive molecular dynamics simulation at 298 K, we systematically examine the coupling between protein conformations and water structures of pressures of 0.001, 5, 10, 15, 20 kbar, starting from (partially) unfolded structures of the protein Bovine Pancreatic Trypsin Inhibitor (BPTI). We also calculate localized thermodynamics at those pressures as a function of protein-water distance. Our findings show that both protein-specific and generic effects of pressure are operating. In particular, we found that (1) the amount of increase in water density near the protein depends on the protein structural heterogeneity; (2) the intra-protein hydrogen bond decreases with pressure, while the water-water hydrogen bond per water in the first solvation shell (FSS) increases; protein-water hydrogen bonds also found to increase with pressure, (3) with pressure hydrogen bonds of waters in the FSS getting twisted; and (4) water’s tetrahedrality in the FSS decreases with pressure, but it is dependent on the local environment. Thermodynamically, at higher pressure, the structural perturbation of BPTI is due to the pressure-volume work, while the entropy decreases with the increase of pressure due to the higher translational and rotational rigidity of waters in the FSS. The local and subtle effects of pressure, found in this work, are likely to be typical of pressure-induced protein structure perturbation.Adsorption is the accumulation of a solute at an interface that is formed between a solution and an additional gas, liquid, or solid phase. The macroscopic theory of adsorption dates back more than a century and is now well-established. Yet, despite recent advancements, a detailed and self-contained theory of single-particle adsorption is still lacking. Here, we bridge this gap by developing a microscopic theory of adsorption kinetics, from which the macroscopic properties follow directly. One of our central achievements is the derivation of the microscopic version of the seminal Ward-Tordai relation, which connects the surface and subsurface adsorbate concentrations via a universal equation that holds for arbitrary adsorption dynamics. Furthermore, we present a microscopic interpretation of the Ward-Tordai relation that, in turn, allows us to generalize it to arbitrary dimension, geometry, and initial conditions. The power of our approach is showcased on a set of hitherto unsolved adsorption problems to which we present exact analytical solutions. The framework developed herein sheds fresh light on the fundamentals of adsorption kinetics, which opens new research avenues in surface science with applications to artificial and biological sensing and to the design of nano-scale devices.Trapping diffusive particles at surfaces is a key step in many systems in chemical and biological physics. Trapping often occurs via reactive patches on the surface and/or the particle. The theory of boundary homogenization has been used in many prior works to estimate the effective trapping rate for such a system in the case that either (i) the surface is patchy and the particle is uniformly reactive or (ii) the particle is patchy and the surface is uniformly reactive. In this paper, we estimate the trapping rate for the case that the surface and the particle are both patchy. In particular, the particle diffuses translationally and rotationally and reacts with the surface when a patch on the particle contacts a patch on the surface. We first formulate a stochastic model and derive a five-dimensional partial differential equation describing the reaction time. We then use matched asymptotic analysis to derive the effective trapping rate, assuming that the patches are roughly evenly distributed and occupy a small fraction of the surface and the particle. This trapping rate involves the electrostatic capacitance of a four-dimensional duocylinder, which we compute using a kinetic Monte Carlo algorithm. We further use Brownian local time theory to derive a simple heuristic estimate of the trapping rate and show that it is remarkably close to the asymptotic estimate. Finally, we develop a kinetic Monte Carlo algorithm to simulate the full stochastic system and then use these simulations to confirm the accuracy of our trapping rate estimates and homogenization theory.The dynamics of many-body fermionic systems are important in problems ranging from catalytic reactions at electrochemical surfaces to transport through nanojunctions and offer a prime target for quantum computing applications. Here, we derive the set of conditions under which fermionic operators can be exactly replaced by bosonic operators that render the problem amenable to a large toolbox of dynamical methods while still capturing the correct dynamics of n-body operators. Importantly, our analysis offers a simple guide on how one can exploit these simple maps to calculate nonequilibrium and equilibrium single- and multi-time correlation functions essential in describing transport and spectroscopy. We use this to rigorously analyze and delineate the applicability of simple yet effective Cartesian maps that have been shown to correctly capture the correct fermionic dynamics in select models of nanoscopic transport. We illustrate our analytical results with exact simulations of the resonant level model. Our work provides new insights as to when one can leverage the simplicity of bosonic maps to simulate the dynamics of many-electron systems, especially those where an atomistic representation of nuclear interactions becomes essential.Polarimetric angle-resolved second-harmonic scattering (AR-SHS) is an all-optical tool enabling the study of unlabeled interfaces of nano-sized particles in an aqueous solution. As the second harmonic signal is modulated by interference between nonlinear contributions originating at the particle’s surface and those originating in the bulk electrolyte solution due to the presence of a surface electrostatic field, the AR-SHS patterns give insight into the structure of the electrical double layer. The mathematical framework of AR-SHS has been previously established, in particular regarding changes in probing depth with ionic strength. However, other experimental factors may influence the AR-SHS patterns. Here, we calculate the size dependence of the surface and electrostatic geometric form factors for nonlinear scattering, together with their relative contribution to the AR-SHS patterns. We show that the electrostatic term is stronger in the forward scattering direction for smaller particle sizes, while the ratio of the electrostatic to surface terms decreases with increasing size. Besides this competing effect, the total AR-SHS signal intensity is also weighted by the particle’s surface characteristics, given by the surface potential Φ0 and the second-order surface susceptibility χs,2 2. The weighting effect is experimentally demonstrated by comparing SiO2 particles of different sizes in NaCl and NaOH solutions of varying ionic strengths. For NaOH, the larger χs,2 2 values generated by deprotonation of surface silanol groups prevail over the electrostatic screening occurring at high ionic strengths; however, only for larger particle sizes. This study establishes a better connection between the AR-SHS patterns and surface properties and predicts trends for arbitrarily-sized particles.We experimentally studied the three-body fragmentation dynamics of a noble gas cluster (ArKr2) upon its multiple ionization by an intense femtosecond laser pulse. The three-dimensional momentum vectors of correlated fragmental ions were measured in coincidence for each fragmentation event. A novel comet-like structure was observed in the Newton diagram of the quadruple-ionization-induced breakup channel of ArKr2 4+→ Ar+ + Kr+ + Kr2+. The concentrated head part of the structure mainly originates from the direct Coulomb explosion process, while the broader tail part of the structure stems from a three-body fragmentation process involving electron transfer between the distant Kr+ and Kr2+ ion fragments. Due to the field-driven electron transfer, the Coulomb repulsive force of the Kr2+ and Kr+ ions with respect to the Ar+ ion undergoes exchange, leading to changes in the ion emission geometry in the Newton plot. An energy sharing among the separating Kr2+ and Kr+ entities was observed. Our study indicates a promising approach for investigating the strong-field-driven intersystem electron transfer dynamics by using the Coulomb explosion imaging of an isosceles triangle van der Waals cluster system.The interactions between molecules and electrode surfaces play a key role in electrochemical processes and are a subject of extensive research, both experimental and theoretical. In this paper, we address the water dissociation reaction on a Pd(111) electrode surface, modeled as a slab embedded in an external electric field. We aim at unraveling the relationship between surface charge and zero-point energy in aiding or hindering this reaction. We calculate the energy barriers with dispersion-corrected density-functional theory and an efficient parallel implementation of the nudged-elastic-band method. We show that the lowest dissociation barrier and consequently the highest reaction rate take place when the field reaches a strength where two different geometries of the water molecule in the reactant state are equally stable. The zero-point energy contributions to this reaction, on the other hand, remain nearly constant across a wide range of electric field strengths, despite significant changes in the reactant state. Interestingly, we show that the application of electric fields that induce a negative charge on the surface can make nuclear tunneling more significant for these reactions.We used all-atom molecular dynamics simulation to investigate the elastic properties of double-stranded DNA (dsDNA). We focused on the influences of temperature on the stretch, bend, and twist elasticities, as well as the twist-stretch coupling, of the dsDNA over a wide range of temperature. The results showed that the bending and twist persistence lengths, together with the stretch and twist moduli, decrease linearly with temperature. However, the twist-stretch coupling behaves in a positive correction and enhances as the temperature increases. The potential mechanisms of how temperature affects dsDNA elasticity and coupling were investigated by using the trajectories from atomistic simulation, in which thermal fluctuations in structural parameters were analyzed in detail. We analyzed the simulation results by comparing them with previous simulation and experimental data, which are in good agreement. The prediction about the temperature dependence of dsDNA elastic properties provides a deeper understanding of DNA elasticities in biological environments and potentially helps in the further development of DNA nanotechnology.We present a computer simulation study of the aggregation and ordering of short alkane chains using a united atom model description. Our simulation approach allows us to determine the density of states of our systems and, from those, their thermodynamics for all temperatures. All systems show a first order aggregation transition followed by a low-temperature ordering transition. For a few chain aggregates of intermediate lengths (up to N = 40), we show that these ordering transitions resemble the quaternary structure formation in peptides. In an earlier publication, we have already shown that single alkane chains fold into low-temperature structures, best described as secondary and tertiary structure formation, thus completing this analogy here. The aggregation transition in the thermodynamic limit can be extrapolated in pressure to the ambient pressure for which it agrees well with experimentally known boiling points of short alkanes. Similarly, the chain length dependence of the crystallization transition agrees with known experimental results for alkanes. For small aggregates, for which volume and surface effects are not yet well separated, our method allows us to identify the crystallization in the core of the aggregate and at its surface, individually.Understanding the surface properties of glass during the hydrogen fluoride (HF)-based vapor etching process is essential to optimize treatment processes in semiconductor and glass industries. In this work, we investigate an etching process of fused glassy silica by HF gas with kinetic Monte Carlo (KMC) simulations. Detailed pathways of surface reactions between gas molecules and the silica surface with activation energy sets are explicitly implemented in the KMC algorithm for both dry and humid conditions. The KMC model successfully describes the etching of the silica surface with the evolution of surface morphology up to the micron regime. The simulation results show that the calculated etch rate and surface roughness are in good agreement with the experimental results, and the effect of humidity on the etch rate is also confirmed. Development of roughness is theoretically analyzed in terms of surface roughening phenomena, and it is predicted that the values of growth and roughening exponents are 0.19 and 0.33, respectively, suggesting that our model belongs to the Kardar-Parisi-Zhang universality class. Furthermore, the temporal evolution of surface chemistry, specifically surface hydroxyls and fluorine groups, is monitored. The surface density of fluorine moieties is 2.5 times higher than that of the hydroxyl groups, implying that the surface is well fluorinated during vapor etching.Allosteric regulation of intrinsically disordered proteins (IDPs) is still vastly understudied compared to the counterpart of structured proteins. Here, we used molecular dynamics simulations to characterize the regulation of the IDP N-WASP by the binding of its basic region with inter- and intramolecular ligands (PIP2 and an acidic motif, respectively). The intramolecular interactions keep N-WASP in an autoinhibited state; PIP2 binding frees the acidic motif for interacting with Arp2/3 and thereby initiating actin polymerization. We show that PIP2 and the acidic motif compete in binding with the basic region. However, even when PIP2 is present at 30% in the membrane, the acidic motif is free of contact with the basic region (“open” state) in only 8.5% of the population. The very C-terminal three residues of the A motif are crucial for Arp2/3 binding; conformations where only the A tail is free are present at a much higher population than the open state (40- to 6-fold, depending on the PIP2 level). Thus, N-WASP is competent for Arp2/3 binding before it is fully freed from autoinhibition.As nanomaterials become more prevalent in both industry and medicine, it is crucial to fully understand their health risks. One area of concern is the interaction of nanoparticles with proteins, including their ability to modulate the uncontrolled aggregation of amyloid proteins associated with diseases, such as Alzheimer’s disease and type II diabetes, and potentially extend the lifetime of cytotoxic soluble oligomers. This work demonstrates that two-dimensional infrared spectroscopy and 13C18O isotope labeling can be used to follow the aggregation of human islet amyloid polypeptide (hIAPP) in the presence of gold nanoparticles (AuNPs) with single-residue structural resolution. 60 nm AuNPs were found to inhibit hIAPP, tripling the aggregation time. Furthermore, calculating the actual transition dipole strength of the backbone amide I’ mode reveals that hIAPP forms a more ordered aggregate structure in the presence of AuNPs. Ultimately, such studies can provide insight into how mechanisms of amyloid aggregation are altered in the presence of nanoparticles, furthering our understanding of protein-nanoparticle interactions.Narrow bandgap nanocrystals (NCs) are now used as infrared light absorbers, making them competitors to epitaxially grown semiconductors. However, these two types of materials could benefit from one another. While bulk materials are more effective in transporting carriers and give a high degree of doping tunability, NCs offer a larger spectral tunability without lattice-matching constraints. Here, we investigate the potential of sensitizing InGaAs in the mid-wave infrared throughout the intraband transition of self-doped HgSe NCs. Our device geometry enables the design of a photodiode remaining mostly unreported for intraband-absorbing NCs. Finally, this strategy allows for more effective cooling and preserves the detectivity above 108 Jones up to 200 K, making it closer to cryo-free operation for mid-infrared NC-based sensors.The isotropic and anisotropic coefficients Cn l,m of the long-range spherical expansion ∼1/Rn (R-the intermolecular distance) of the dispersion and induction intermolecular energies are calculated using the first principles for the complexes containing an aromatic molecule (benzene, pyridine, furan, and pyrrole) and alkali-metal (Li, Na, K, Rb, and Cs) or alkaline-earth-metal (Be, Mg, Ca, Sr, and Ba) atoms in their electronic ground states. The values of the first- and second-order properties of the aromatic molecules are calculated using the response theory with the asymptotically corrected LPBE0 functional. The second-order properties of the closed-shell alkaline-earth-metal atoms are obtained using the expectation-value coupled cluster theory and of the open-shell alkali-metal atoms using analytical wavefunctions. These properties are used for the calculation of the dispersion Cn,disp l,m and induction Cn,ind l,m coefficients (Cn l,m=Cn,disp l,m+Cn,ind l,m) with n up to 12 using the available implemented analytical formulas. It is shown that the inclusion of the coefficients with n > 6 is important for reproducing the interaction energy in the van der Waals region at R ≈ 6 Å. The reported long-range potentials should be useful for constructing the analytical potentials valid for the whole intermolecular interaction range, which are needed for spectroscopic and scattering studies.The nuclear-spin-dependent parity-violation contributions to the nuclear magnetic resonance shielding and nuclear spin-rotation tensors (σPV and MPV, respectively) are known to be formally related to one another in the non-relativistic regime. In this work, the polarization propagator formalism and the linear response within the elimination of small components model are used to show a new and more general relationship between them, which is valid within the relativistic framework. The full set of the zeroth- and first-order relativistic contributions to σPV and MPV are also given here for the first time, and these results are compared with previous findings. According to four-component relativistic calculations, the electronic spin-orbit effects are the most significant ones for the isotropic values of σPV and MPV in the H2X2 series of molecules (with X = O, S, Se, Te, and Po). When only scalar relativistic effects are taken into account, the non-relativistic relationship between σPV and MPV does hold. However, when the spin-orbit effects are taken into consideration, this old non-relativistic relationship breaks down, and therefore, the new one must be considered.Information about molecular collisions is encoded in the shapes of collision-perturbed molecular resonances. This connection between molecular interactions and line shapes is most clearly seen in simple systems, such as the molecular hydrogen perturbed by a noble gas atom. We study the H2-Ar system by means of highly accurate absorption spectroscopy and ab initio calculations. On the one hand, we use the cavity-ring-down-spectroscopy technique to record the shapes of the S(1) 3-0 line of molecular hydrogen perturbed by argon. On the other hand, we simulate the shapes of this line using ab initio quantum-scattering calculations performed on our accurate H2-Ar potential energy surface (PES). In order to validate the PES and the methodology of quantum-scattering calculations separately from the model of velocity-changing collisions, we measured the spectra in experimental conditions in which the influence of the latter is relatively minor. In these conditions, our theoretical collision-perturbed line shapes reproduce the raw experimental spectra at the percent level.
Categories